Grade | Physical & mechanical properties | Recommended applications |
Density g/cm3 | Typical values |
Hardness HRA | TRSN/mm2 (Sample B) |
YG6 | 14.95 | 91.0 | 2580 | Universal grades widely used in machining tools for castiron,nonferrous metals and their alloys and nonmetal materials,wear parts,and tools for machining other alloys |
YG8 | 14.74 | 90.2 | 2710 |
YG6X | 14.93 | 91.9 | 2480 | Suitable for the semi-finishing of hard castiron,nonferrous metals and their alloys,and also suitable for the semi-finish-ing and finishing of common castiron and high manganese steel work-pieces and for other tools. |
YG6A | 14.89 | 92.7 | 2350 |
YG8C | 14.69 | 89.1 | 2850 | Mainly used for rock drilling,auger tips and well drilling tools and at the same time for drilling stone walls,cement in construction and installation work,and for machining stone materials. |
YG11C | 14.32 | 87.8 | 2940 |
YL10.2 | 14.45 | 91.8 | 2880 | Mainly used for manufacturing strips and disc cutters and also for other tools. |
YD25 | 14.38 | 91.5 | 2850 | Mainly for manufacturing strips and also for other tools. |
YM80 | 14.76 | 90.9 | 2590 |
YS2T | 14.45 | 92.4 | 2380 | Mainly used for disc cutters and also for other tools |
YS8 | 14.05 | 93.5 | 2170 | Suitable for the rough and finishing of stainless steel,finishing of high strength steel,finishing and semi-finishing of hardened steel,and the machining of iron based heat resistant alloys and glass articles. |