Tungsten,Molybdenum,Tantalum and Niobium Products
   Tungsten and Molybdenum products
   Tantalum and Niobium products
 
 Indium Products
 
 Gallium Products
 
 Cemented carbide
   Pattern products and rods
   Special carbide products
   Carbide for mining
   Roll rings
   Cutting inserts
   The series of moulds and dies
   Anvils pressure cylinders
   Steel-bonded carbide
   Other cemented carbide
 
 Carbide grade powder
 
 Cobalt and its compounds
 
 Cemented carbide for construct
   Mining tools
   Engineering tools
 
 Hard-facing materials
   Copper based welding rods
   Spray powder
   Cast tungsten carbide
 
 Metal compounds
   Tungsten compounds
   Molybdenum compounds
 
 
Product name : Grades,properties and recommended applications of cemented carbide anvils and pressure cylinders
Pageview : 1786
Product detail
Grades,properties and recommended applications of cemented carbide anvils and pressure cylinders
 
     
Cemented carbide >>> Grades,properties and recommended applications of cemented carbide anvils and pressure cylinders

Grade

Physical properties (typical value)

Recommended applications
 

Density
g/cm

HRA HV3
HV
TRS
Mpa
 
YL10.3

14.95

90.5

1450

2300

Special grade for 2-facet anvils
YL20.3 14.75 90 1400 3000 Univercal grade for 6-facet anvils with a higher hardness and TRS and the TRS will increase by 30% after the products are sintered at a low pressure.
YL20.4 14.75 90 1400 3200 Special grade with a higher hardness and TRS and good resistance to thermal cracking for 6-facet anvils of a diameter over 160mm.
YL30.3 14.41 88.5 1250 3400 For manufacturing pressure cylinders of the class of 30-50kgs.
 
 
Zhuzhou Apollo Special Metals Co.,Ltd
Tel:+86-731-28349720 Fax:+86-731-28332059
Http://www.exportmetals.com Email:sales@exportmetals.com